Don't let invisible gold and white sludge escape anymore! The new generation of gold recovery shakers adopts the "microlayer flow membrane sorting technology", with a gold recovery rate increased by more than 30%. Even microscopic gold particles as small as -0.074mm can be accurately captured. Recover 3 times more gold than ordinary chutes, with the same raw ore, directly increasing output profits! - Multi-size bed surfaces of 0.5㎡-4.5㎡, capable of handling all types of gold ores (gold nuggets/sand gold/rock gold) - Frequency-adjustable, with stroke lengths of 8-36mm and operating speeds of 250-450 times/minute, allowing one-click adaptation to different ore properties - Imported HDPE wear-resistant bed surfaces, resistant to corrosion and deformation, requiring no replacement for 180 days of continuous operation - Energy consumption ≤ 1.1kW·h/ton of ore, with water consumption only 60% of traditional shakers - saving money on both electricity and water - 7 different slope settling zones form a "gold ladder", automatically enriching heavy minerals into the bottom concentrate zone - Innovative "double-curved wave" bed strips generate secondary vortices, "pulling" gold particles out of quartz inclusions - Clear banding allows direct connection to concentrate bags on-site, eliminating the need for additional screening or panning, saving half the manual labor - At a mine in Yunnan: After switching to this shaker, the concentrate grade jumped directly to 268g/t from 0.83g/t, with the tailings reduced to 0.06g/t. Over one month, 1.4kg of additional gold was produced. At 450 yuan/g, the equipment cost was recovered in less than 10 days! - 1 set of imported gold panning pans - 1 portable gold sand measuring electronic scale - 1 sample of mining reagents - 24-hour technical video guidance, with remote debugging available on-site at the mine